Why Does My Rolls Royce Phantom Key Fob Not Work?
The Rolls-Royce Phantom is a luxury car that reflects prestige and wealth. Its huge grille that resembles waterfalls and classic upright dimensions are instantly recognizable. It is also one of the world's most expensive cars.
A rolls royce phantom key fob may not function due to a variety of reasons. The most frequent cause is a dead coin battery however it could be caused by water damage or problems with the receiver module.
Battery
The most common reason for a Rolls-Royce Phantom key fob not functioning is the dead battery within. However it is essential to keep in mind that the key fob also could stop working due to a variety of reasons, including damaged buttons, water damage and bad battery contact signal interference, or even unpaired keys requiring changing the program. Contact a locksmith if your key fob isn't working. A locksmith can quickly diagnose the problem and offer a quick solution.
It is important to protect the battery from moisture and dirt so that it is fully functional. This is the reason why it is recommended that you always use a waterproof key fob case while driving. It is also recommended to remove the battery from the key fob before washing or cleaning it. Furthermore, the chip inside the key fob is extremely sensitive to water and should never be exposed to salty or soapy water. If the key fob is vulnerable to exposure to water, use isopropyl alcohol or electronic cleaner to protect against water damage.
The battery pack of the Phantom EE is a unique power system with a number innovations. This makes it stand out from other luxury vehicles with traditional power systems. A "power reserve dial" for instance is now incorporated into the dashboards to inform drivers of the vehicle's current power state. This is a new design feature that is designed to challenge conventional car-related paradigms and highlight the potential of alternative drivetrain technology.
This electric powertrain has the advantage of allowing recharges without a physical connection between the car and charging station. This is achieved through induction, which involves the transfer of power across two surfaces: an induction pad on the ground, and an energy transfer module that is located under the battery pack.
The process of recharging takes place in two stages, with a capacity of 13.5kW per phase and an overall charge capacity of 71kWh. It is the largest battery for a passenger car in the world. Additionally the Phantom EE is fitted with three separate charger units that permit single-phase and three-phase charging as well as regenerative braking.
Contacts
If your Rolls Royce Phantom key fob was not working, it could be due to a dead battery, worn buttons or other causes. This problem is usually simple to fix. You can also try reprogramming the key fob or replacing the battery 12 volt. If the problem persists, the receiver module might be malfunctioning. The remote keyless system and other electronic components onboard make use of the receiver module to communicate with each other via radio signals. If the receiver module is damaged, it will stop communicating with the key fob and other onboard electronics.
If you're having issues with the key fob, it is important to make sure the battery contacts are dry and clean. The metal retaining clips hold the button cell in position and complete the circuit, and they can be damaged by wet or dirty hands. If the battery is old and needs to be replaced, it is recommended to replace it with a brand new one with the same size and voltage. If you replace the battery, make sure to wash the contact surfaces with rubbing alcohol or electronic cleaner before rebuilding the key fob.
The key fob on the Rolls Royce Phantom has an electronic chip that transmits signals to the remote keyless system module. The receiver module converts signals into commands that the car is able to understand. This is how your car knows that you're looking to unlock the doors or retract the famous "flying lady" ornament on the hood into the grille.
If the key fob was exposed to water, you should immediately remove it from the vehicle and rinse the electronic chip using isopropyl alcohol or an electronic cleaner. If you do not take this action the chip could be fried.
Water damage
The key fob is made with rubber seals that prevent the electronic chip inside from being exposed to water. This makes it impervious to splashes and light rain but not the type of deep immersion that could be experienced when you drop your key into a puddle or submerge it in the ocean. If the fob gets wet the chip might be damaged. It is necessary to replace it.
You can still salvage your roll royce key fob even if it has been soaked by a dog or washing machine soapy handwashing. You can save money by following simple instructions.
First, rolls royce key features must dismantle the key fob, then thoroughly dry it. If you can, take off the battery and make use of compressed air to remove any excess moisture. After you've completed this, leave it to dry out for a few days and attempt to use it again.
If your key fob tends to get wet, you should think about buying a waterproof case to protect it from accidents. It's also an excellent idea to have an extra key in the case to avoid having to wait for the fob to dry out.
In some cases the Rolls Royce Phantom key fob might stop working due to interference or a dead 12 volt battery. This problem is often caused by objects, bad weather conditions or transmitters operating at the same frequency as your remote.
Keep your key fob away from these sources. If you can't avoid these sources of interferance, you can move your car to a different location or reprogram the remote. If you're unable to fix the issue, you should to seek out an expert technician. They will be able to identify the problem and determine if it's an electric or mechanical issue.
Reprogramming
The key fob in your Rolls Royce Phantom is an important part of the security system of your vehicle. It relays commands to the receiver module, which transmits them to the vehicle's central locking mechanism. It can be extremely frustrating and costly if the key fob stops functioning. There are fortunately a few ways to get it working again.
The first thing to determine is whether the coin battery in the key fob is dead. It is the most common cause of Phantom key fobs that are not locking or unlocking and typically indications of wear and tear, for example the ability to lock or unlock is reduced. Replace the battery with a new one of the same voltage, size, and specification. Check that the metal clips that keep the batteries in place aren't loose.
Another possible cause is water damage. The key fob is equipped with rubber seals that prevent water from reaching the electronic chip inside, but when it is immersed in salty or soapy water, the seals could fail. If this happens, you should remove the battery and clean it using isopropyl alcohol or an electronic cleaner. Dry it thoroughly before putting it back into the fob.
If the key fob still isn't working it could be an indication that the receiver module has suffered a malfunction. The best way to diagnose this is to connect an electronic diagnostic scanner to the OBD port located under the dashboard of your Phantom. The scanner will request information about your vehicle including the year, model and engine type. You'll also need to enter the code for your key fob.
Signal interference is a different cause. This could be caused by weather conditions, objects or transmitters that operate on the same frequency. The remote control will function when you're near the Phantom however it will not lock or unlock from some distance. This can be resolved by removing objects that may block the signal, or by moving the Phantom further away from the transmitters.